FreeGaussian now builds Gaussian splats from raw DJI Osmo 360 .OSV files

BlogFreeGaussianCode & ToolsHardware

FreeGaussian now builds Gaussian splats from raw DJI Osmo 360 .OSV files
FreeGaussian

FreeGaussian says it now processes raw DJI Osmo 360 .OSV files natively, building a Gaussian splat and a 3D mesh from the camera’s original fisheye recordings rather than from a stitched export. The 11 November 2026 post puts the Osmo 360 on the same native fisheye pipeline the service already uses for the Insta360 X5 and X6 and the Antigravity A1.

Each .OSV keeps the two lenses as separate square fisheye videos, together with the motion data the camera always records. FreeGaussian reconstructs from those unstitched views and uses the IMU to recover gravity and scale, so floors come out level, walls vertical, and one metre in the scene matches one metre on site. In the company’s tests against measured markers, scale from 8K 30 fps video came within half a percent. It still advises checking a known distance in the viewer for survey-grade work. Because the output is metric, the viewer’s measuring tool reports metres directly, and the mesh can be dropped into Blender, a game engine, or a simulator such as MuJoCo or NVIDIA Isaac Sim without rescaling.

The pipeline is tuned on 8K video at 30 fps. Timelapse is discouraged, because it stores motion data too rarely and produces a scene that is level but not at real-world scale. Users should copy the original .OSV from the camera’s card and pick DJI Osmo 360 on the upload page; exports from DJI Mimo or DJI Studio, or any conversion that throws away the fisheye images and IMU data, lose those benefits. An exported equirectangular .mp4 can still be uploaded as equirectangular video. Raw .OSV files run about 1 GB per minute. The native pipeline is available on the free plan, with the usual terms: free uploads may be featured by FreeGaussian, while paid scenes stay with the customer.