Flytech: the Italian engineers measuring the world from the air and now testing Gaussian splattingFeature
Flytech is one of those companies that makes reality capture look easy because the engineering behind it is so careful. The Italian firm flies drones, LiDAR scanners and radiometric cameras, but what it really sells is a measurement you can trust. Its reports are signed by a registered engineer, and its survey accuracy is checked against independent control points. And since INTERGEO 2026 it has been testing the new Gaussian splatting tools in DJI Terra.
Who Flytech is
On LinkedIn, Flytech - AI&Drone Services describes itself as an engineering company founded in 2023, with 2 to 10 employees. Its headquarters are in Paderno d’Adda (Lecco), with further sites in Monza and in Rende (Cosenza). Its website adds that the team has worked together since 2023 and was incorporated as Flytech S.r.l. in October 2026. It is a registered ENAC drone operator and carries professional liability cover of up to €6.5 million.
The service list is broad:
- Certified solar thermography. Drone surveys of photovoltaic plants follow IEC TS 62446-3, and the reports are signed by an ISO 9712 Level II thermographer. Plants stay in operation during the flight.
- 3D surveys. Drone LiDAR, photogrammetry and handheld SLAM, tied together with GNSS RTK in a single georeferenced model. Deliverables include LAS/LAZ point clouds, DWG/DXF drawings, GeoTIFF orthophotos, IFC models and a browser-based digital twin.
- Drone cleaning. Solar modules, glass façades and roofs are washed from the air with osmosis-treated water and no detergents. Flytech reported on LinkedIn that its own engineered ground station has an 800-litre tank and supplies 600 litres an hour of heated osmosis water.
- Rover mowing. A remote-controlled tracked mower handles slopes of up to 60°, alongside an RTK-guided spray rover.
- On-premise AI. Flytech also offers AI that runs on the customer’s own infrastructure. Its website says customers’ models stay on their own servers.
Numbers, not adjectives
What stands out in Flytech’s posts is how precisely it reports its work.
- Milan construction site. Flytech reported on LinkedIn that it captured 80,000 m² in four days, using 20 GNSS RTK control points. The result was a 270-million-point cloud, with an RMSE of 1.5 cm planimetric and 2.3 cm vertical. Its website case study says the site, the new Autotorino headquarters, was surveyed by two people while demolition carried on.
- Emergency survey of a torrent bank. Flytech reported on LinkedIn that a drone LiDAR survey showed the stream’s axis had shifted by up to 14 m over a 366 m stretch, with more than 1,200 m³ of bank eroded.
- Villa Reale di Monza. For a roof survey of the historic villa, Flytech reported accuracies of 7 mm and 11 mm.
The thermography work is just as concrete. The pair below, from a Flytech LinkedIn post, shows the same rooftop modules in visible light and in infrared. The modules look identical to the eye. In the thermal image, two of them stand out as hotter.
The 3DGS angle
Flytech went to INTERGEO 2026 in Munich (15–17 September), where, according to its LinkedIn posts, DJI invited the team to its stand. Afterwards Flytech began testing the new Digital Twin and Gaussian Splatting features in DJI Terra. For SplatMan News readers, this is the interesting part. A firm whose business rests on certified, centimetre-level measurement is now working with splats. In Flytech’s own approach, the photorealistic model is used for communication, and measurements are still taken from the classified, verified point cloud.
Davide Giovinazzo
Davide Giovinazzo is Flytech’s founder. According to LinkedIn, he has been its operations director (Direttore operativo) since January 2023. He is a civil engineer and a certified drone pilot, with a background in timber and structural engineering. He also holds ISO 9712 Level 2 thermography certification from Bureau Veritas. The company website lists him as Head of Operations and as the engineer who signs Flytech’s survey acceptance certificates and thermography reports. Pietro Castelli is Flytech’s CEO.
Get in touch
You can find Flytech at flytechnologies.it and on LinkedIn.
Disclosure: Josua Hönger, publisher of SplatMan News, recently visited Flytech’s offices to talk about 3D technology and Gaussian splatting.